GASKET MTRI SERIES & SPIRAL WOUND GASKET

Range of sizes: DN15~DN1500 (Design and manufacture based on clients requests.)
Nominal pressure: Class150(PN20)、Class300(PN50)、Class600(PN110)、Class900(PN150)、Class1500(PN260)、Class2500(PN420)
Applicable medium: Steam, hydrogen, natural gas, cracking gas, oil, acid, alkali, salt solution
Metal material: 304、304L、316、316L、321, Carbon Steel、
Characteristic and advantage:

• The inner ring, which can prevent the medium erode sealing surface, and The outer ring is to strengthen the position, is a high performance sealing products.
• It has favorable compression ratio and elasticity.
• As its appropriate plasticity, it can fill the gap between the sealing surface by pressing.
• To ensure the gasket has the excellent sealing performance when the system temperature and pressure alternative changes.
• With excellent corrosion resistance,Not to be damaged in some extreme medium,and do not expansion and contraction.
• Under the condition of high temperature,not soften,not creep.
• Under the condition of low temperature,not harden, no shrinkage.
• It has enough strength,In the external load conditions,Don't be crushed; under high pressure, do not blown out.

1.The spiral wound gasket is overlapped with the precompressed corrugated metal and non metal strip,spiral winding. It can add center ring according to the working requirements.

2.Because of the multi-channel sealing, the gasket can be used in the high temperature and high pressure, corrosion resistance. It has low requirements of the flange surface.

3.It widely used in the sealing flange , manhole, hand hole, pipe, boiler, heat exchanger, pressure vessel, steam turbine, a communicating pipe, conduit, compressors, valves and others.

4.Used in electric power, petrochemical, chemical fertilizer, polysilicon, aviation, navigation, automobile, shipbuilding, food, medicine and other fields.