Dow Corning Molykote 3451 Chemical Resistant Bearing Grease

 

Dow Corning Molykote 3451 Chemical Resistant Bearing Grease 3oz 84g Tube

Product Features

• Provides superior resistance to most chemicals, good loadcarrying ability, effective in high temperatures.
• Is compatible with most gaskets, seals and packings.
• Resist washout by water, fuels, oils and solvents.
• Resists deterioration by solvents, acids, chlorides and other severe chemicals as well as low-pressure steam and condensate.
• Temperature from -40 to 450°F (-40 to 232°C).

 

Needle Valve

Needle Valve

Female Needle Valve Needle Valve-Angle Needle Valve - OD Male Needle Valve Needle Valve - M x F Hex Needle Valve - F x F Hex Needle Valve - VentGauge Multiport ValveNeedle Gauge Valve Needle Valve FAV™ PRODUCT OF THE MONTH- AUGUST 2013 Sizes 1/8" to 3" End Connection NPT,BSP,Socket Weld Material SS 316 , SS 316L, SS 304 , CS, Brass,Monel, High Duty Bronze, and Hastelloy. Pressure upto 10,000 psi. Temperature upto 600°c

Ready stock Low press Needle valve - Press 30 Bars - for water

Wafer Single Check Valve

 

Wafer Single Check Valve; ANSI # 150; size 4 " ( DN100) , Material SS316

 Ready stock size 4" dan 2"

Flexible Packing Extractors SET

 

Flexible Packing Extractors SET

Flexible Packing Extractors are the most rugged tools available for packing removal. The flexible shaft is constructed of twisted steel cable which easily conforms to close working conditions. The corkscrew tips are swaged on the steel cable, not welded. Made of tempered steel, the tips will not straighten out during packing removal

LCD Touch Screen Panel

LCD Touch Screen Panel merek Fujitsu, LG, Mitsubishi, Sharp, Kyocera, PVI, dan lain-lain yang dapat diapplikasikan untuk PLC / Control Room dan cocok untuk hardware siemens, ABB, dll

DOW CORNING 732 RTV Silicone Sealant

 

DOW CORNING 732 RTV Silicone Sealant

Single Component
Room Temperature Curing
FDA Approved
General Purpose-Seals-Bonds-Caulks,
Fastens-Plugs-Dampens-Gaskets,
Protects-Insulate s-Repairs,
Waterproofs & more

Siemens Part

Spart-Part Siemens :

MCCB ; Rotary Mechanish Knop, Main Contactor, Overload Relay. Siemens Modul dan PLC part-siemens lainnya.

Note : Khusus untuk Pabrik-Pabrik - Power Plant - PLTA - PLTG - PLN

Keystone PTFE Lined Buttefly Valve, size 3 " - ANSI # 150

Keystone PTFE Lined Buttefly Valve, size 3 " - ANSI # 150

Keystone Hard Rubber Butterfly Valve 2"

Keystone Hard Rubber Butterfly Valve 2"
 
Features• Factory testing of every valve at full rating ensures 100% bubble-tight shut-off.• Standard actuator flange to facilitate the exchange operator and mount directlyKeystone various actuators.• One-piece wafer-thin disc-stem provides high strength and control discs really positive and very minimum obstruction to flow. gap-free surface which makes it ideal for hygienic duty.• Primary seal formed by contact seat / shaft / hub exceed the pressure rating of the valve. The body is completely isolated from the media flow.• Secondary shaft seal is suitable for pressure and vacuum is self adjusting.• Patented seat dove tail require bonding. Creating seat replacement simple and fast. The edge of the extra weight against tearing.• Hub seal is provided by the contact between the surface of the seat preloaded flatted and rounded polished disc-hub area for positive sealing at all disc positions.• Molded-in O-ring provides a positive lead sealing and eliminates the need for gaskets.• Heavy duty top bushing absorbs side thrust loads. Adjusting sealing for bothdirection is also suitable for vacuum.

Safety Relief Valve - Korea

Safety Relief Valve - Korea
Safety Valve yang dirancang dalam konstruksi baja stainless. Katup pengaman angkat rendah ini tersedia dalam berbagai ukuran untuk berbagai aplikasi. Mereka beroperasi pada suhu 60 º C hingga 196 º C dengan rentang tekanan 2, 8-150 psig, 28-150 psig, dan 156-285 psig.

Ready stock size Dn 25 ( 1 inch ) with press 1 MPa

K4 PVC Wafer Check Valve

K4 PVC Wafer Check Valve
Characteristics:
• • simple and robust design
• • maintenance free
• • valve disc position indication
• • available with or without position indication pin
• • very low pressure loss because of big aperture angle of the disc 83°
• • full disc opening also in PP and PE piping systems guaranteed
• • models with spring package ( 2 springs PN10, big spring PN 7 and small spring PN3)
allows adaptation of the wafer check valve to the pressure range within the system
• • simple installation between flanges through attached eyelets
( DIN; ANSI; JIS) and frontal O-rings.
• • no more discharge help required
• • up to 50% higher flow rates compared to type S460, S470
• • minimal pressure loss
• • higher operating pressures
Operating temperature: max. 60 ° C

Aneka macam valve Tyco, Velan, Valtaco, Arita, Vanessa, Crane, Xomox dll

Aneka macam valve Tyco, Velan, Valtaco, Arita, Vanessa, Crane, Xomox dll

Menjual berbagai macam type Ball Valve, Gate Valve, Globe Valve, Check Valve, Needle Valve, Steam Trap, Knife Gate Valve, Butterfly Valve dengan bermacam-macam merek dan type, dari JIS, PN, ANSI, dengan berbagai macam type material dari PVC, U-PVC, WCB, Carbon steel, SS304, S316, Duplex dll.

Glass Resistive Touch screen

Glass Resistive Touch screen dan Glass resistive Touch Panel, 4 wire, 5wire, 8 wire.
Applikasi cocok untuk PLC System dan Digital Control System pada power plant, MCC Panel, Bermacam-macam ukuran

SIMATIC TOUCH PANEL- SIEMENS FOR PLC

SIMATIC TOUCH PANEL- SIEMENS FOR PLC

All the siemens HMI we sold, 100% brand new! Coming with original packing! SIMATIC HMI offers the full product family for machine level human machine interfaces from a single source: starting with Push Button Panels right up to powerful Multi Panels.

PVC Strip Curtain

PVC Strip Curtain

Curtain adalah sejenis tirai sebagai sekat yang digunakan untuk pemisah, bisa
diantara bagian produksi dengan bagian stok ataupun ruang yang lain.

Strip Curtain PVC kami berfungsi juga sebagai filter atau penyaring dari gangguan seperti serangga dll. namun koneksi antar ruang satu dan yang lain tetap dapat transparan.

F-3000 PENETRATING OIL (RUST PENETRANT)

F-3000 PENETRATING OIL (RUST PENETRANT)

Aerosol
DESCRIPTION
Penetrating oil loosens rust and corrosion formed by alkali, fruit acids, water, and electrolysis. Low surface tension allows the oil to migrate into tight spaces and along threaded fasteners. Reduces the tugging and pounding sometimes required to loosen screws and bolts. Loosens tar, dirt, and carbon on stubborn, rusted bolts.

PRODUCT CHARACTERISTICS :
Appearance : Non foaming liquid
Color : Dark amber
Odor : Mild - hydrocarbon
Specific gravity ( @ 20° C) : 0, 84
Viscosity in centipoise @ 70° F ( 21° C) : NA
Flammability: Label marking : Flammable
Flash point ( Tag Closed Cup) : < 0° F( - 18° C)
Pour point : NA
Operating temperature range : 40-110° F ( 5-43° C)
Penetrating ability : Excellent
Corrosion protection : Excellent

BENEFITS:
Only a few drops of Penetrating Oil is needed, it contains no acid and is effective against salt-water corrosion. Penetrating Oil has a fast penetrating action and displaces moisture. Penetrating Oil makes disassembly of parts possible with savings in time and materials.

APPLICATIONS:
Quick release for nuts, bolts, pipes, fittings, pumps, pulleys, battery cables, roller conveyers, hinges and valves. Use on metals, alloys, rubber, and most painted surfaces.

DIRECTIONS:
Test a small area first to assure surface compatibility. Use at room temperature for best results.
Aerosol: Shake well before use. Hold can 6 " to 10 " from surface, spraying liberally and uniformly. Use extension tube for hard-to-reach areas and pinpoint accuracy.
Bulk: Dip, brush, or spray on.
Cleaning & Maintenance Chemical for Industrial

LIMITATIONS: Please refer to the Material Safety Data Sheets for specific information on material hazards, etc.

PACKAGING:
Aerosol Cans : 400 ml, Box 12 cans
Pail / jerry can 25 liters
Drum 200 liters

FAST 331 OIL SPILL DISPERSANT (OSD)

FAST 331
OIL SPILL DISPERSANT (OSD)

KETERANGAN
F-331OIL SPILL DISPERSANT adalah pendispersi minyak yang mengandung surfactant dengan kadar racun rendah dan pelarut.

KEGUNAAN
Pembersihan terhadap tumpahan minyak , termasuk minyak tanah, kerosene, gas-oil, minyak yang tumpah di pabrik, atau pelabuhan, saluran air, di laut atau di pengeboran lepas pantai.

KELEBIHANNYA
• F-331 OSD merubah cairan hydrocarbon menjadi emulsi. Perubahan menjadi partikel-partikel yang sangat kecil menimbulkan efek-efek : untuk akselerasi degradasi lebih lanjut oleh marine bacteria, untuk mengeliminasi efek pelapisan yang mempengaruhi perubahan medium physicochemical antara atmosfir dan marine.
• Dapat diterima oleh lingkungan hidup, F-331 OSD mengandung surfactant yang sifatnya biodegradable.

PETUNJUK PEMAKAIAN
Polusi di Pabrik
• Lapisan minyak yang tercampur dengan air bila langsung dibuang ke sungai dapat mencemari lingkungan. Jika lapisan minyak cukup tebal dipisahkan terlebih dahulu sebelum didispersi.
• Tambahkan F-331 OSD ke atas lapisan minyak tunggu selama 30 s/ d 60 menit dan aduk.
• Jika lapisan minyak masih ada tambahakan F-331 OSD seperlunya.
Polusi di Pelabuhan
• Sebelum menggunakan F-331 OSD dianjurkan untuk mengelilingi tumpahan minyak dengan oil boom, jika lapisan minyak cukup tebal untuk di skim atau soak dengan menggunakan oil absorbent powder.
• Siramkan FAST 331 OSD ke tumpahan minyak dengan hand spray gun jika tumpahan tidak terlalu besar, atau dengan oil spraying boom yang disambungkan pada air pollution control vessels. Yakinkan produk dapat menyebar ke seluruh tumpahan minyak sebelum gelombang dari mesin kapal menutupinya denga air.
• Tunggu selama 30 sampai 60 menit agar minyak dapat mnyerap produk, kemudian aduk campuran minyak dan dispersant dengan menggunakan firehouse atau peralatan lain untuk agitasi.
Cleaning & Maintenance Chemical for Industrial
• Tumpahan pada dinding dock dapat dihilangkan denga F-331 OSD yaitu : semprotkan produk langsung dan biarkan selama 30 menit, lalu minyak dapat dihilangkan dengan menggunakan fire house. Jika lapisan minyak masih ada , ulangi seperlunya.
Polusi di Laut dan Offshore Drilling Platforms
Metode yang dilakukan sama dengan diatas
• Kelilingi tumpahan minyak dengan oil boom. Dapat dilakukan dengan tiga cara yang berbeda :
- ditarik oleh dua outboard vessel,
- mencegat oil spill yang terbawa arus
- tambatkan kedua ujung pada dua buoys. Teknik ini yang paling sering digunakan di offshore platforms
• Pompa atau skim off tumpahan minyak.

DOSIS PRODUK
• Light hydro carbon ( light crude oil, kerosene, gas-oil) , 100 liter F-331 OSD per 1000 liter hydrocarbon ringan.
• Intermediate crude oil : 150 liter F-331 OSD per 1000 liter crude oil
• Heavy Hydrocarbon ( oxidized crude oil, residual fuels oil : 200 liter F-331 OSD per 1000 liter heavy hydrocarbon ) .

KEAMANAN DAN PENANGANAN
Jika terjadi kontak dengan kulit atau kena mata, cuci dengan air hingga bersih.

KARATERISTIK PRODUK
Bentuk dan Warna : Cairan berwarna kecoklatan
Specific Gravity : 0.80 pada 20 º C PMCC ( IP 34-67 atau ASTM D93-66)
Korosivitas : Tidak ada pada material biasa

KEMASAN
Pail 25 liter, Drum 200 liter

Allpax Extension Gasket Cutter Kits

Allpax Extension Gasket Cutter Kits - Complete kit includes modular extension design allowing quick adjustment of cutting size from 1/4" up to maximum diameter. Special cutting blades are held securely, ensuring consistent and repetitive cuts in  material up to 3/4" thick.

ALLPAX GASKET CUTTER SYSTEMS

 

ALLPAX GASKET CUTTER SYSTEMS

Features:

• Unique patented locking system allows for quick and easy interchange of cutting heads.
• Dual cutting heads allow for cutting inner
• Cutting heads may also be used individually for precision cuts as shown on the right
• Cut a multitude of different materials including foam, cardboard, leather, rubber, fiber, plastic, gasket material and lead.

Allpax Extension Gasket Cutter Kit

Allpax Extension Gasket Cutter Kit - Complete kit, includes modular extension design allowing quick adjustment of cutting size from 1/4" up to maximum diameter. Special cutting blades are held securely, ensuring consistent and repetitive cuts in material up to 3/4" thick. Weight: 10.5 Lbs

Lincoln Kawat Las / Lincoln Electrode

Berbagai macam kawat las Lincoln :

1. Hardfacing HF350
2. Hardfacing HF600
3. Hardfacing HF700
4. Hardfacing Gridur 150AC

5. Mild Steel ID 6013 ( AWS E6013)
6. Low Hydrogen ID 7016-1 ( AWS E7016-)
7. Low Hydrogen-Jet Weld LH70 ( E7018 H4R)
8. All Wire

contact :sumbermas_abadi@ hotmail.com

GASKET MTRI SERIES & SPIRAL WOUND GASKET

Range of sizes: DN15~DN1500 (Design and manufacture based on clients requests.)
Nominal pressure: Class150(PN20)、Class300(PN50)、Class600(PN110)、Class900(PN150)、Class1500(PN260)、Class2500(PN420)
Applicable medium: Steam, hydrogen, natural gas, cracking gas, oil, acid, alkali, salt solution
Metal material: 304、304L、316、316L、321, Carbon Steel、
Characteristic and advantage:

• The inner ring, which can prevent the medium erode sealing surface, and The outer ring is to strengthen the position, is a high performance sealing products.
• It has favorable compression ratio and elasticity.
• As its appropriate plasticity, it can fill the gap between the sealing surface by pressing.
• To ensure the gasket has the excellent sealing performance when the system temperature and pressure alternative changes.
• With excellent corrosion resistance,Not to be damaged in some extreme medium,and do not expansion and contraction.
• Under the condition of high temperature,not soften,not creep.
• Under the condition of low temperature,not harden, no shrinkage.
• It has enough strength,In the external load conditions,Don't be crushed; under high pressure, do not blown out.

1.The spiral wound gasket is overlapped with the precompressed corrugated metal and non metal strip,spiral winding. It can add center ring according to the working requirements.

2.Because of the multi-channel sealing, the gasket can be used in the high temperature and high pressure, corrosion resistance. It has low requirements of the flange surface.

3.It widely used in the sealing flange , manhole, hand hole, pipe, boiler, heat exchanger, pressure vessel, steam turbine, a communicating pipe, conduit, compressors, valves and others.

4.Used in electric power, petrochemical, chemical fertilizer, polysilicon, aviation, navigation, automobile, shipbuilding, food, medicine and other fields.

Teflon gasket sheet

We supply a variety of Teflon sheet which is made using superior quality of material. These PTFE Teflon Sheets are the best alternative in the conditions where high chemical resistance and non-contamination are essential.

O-Ring Cord dan Roll

Our rubber O Ring product is highly demanded in the market for its durable standards, temperature & abrasion resistance, high performance and excellent efficiency

Expansion Joint Bellows & flexsible metal

 

Expansion Joint Bellows & flexsible metal

Tiff Expansion Joints Avaliable with Stainless steel 304, SS316, SS321 and single,double,triple style.

Rubber Expansion Joints

Rubber expansion joints / compensators are used as flexible connectors within pipe systems.

ERV’s are single sphere type rubber expansion joints within swivelling metal flanges. The high quality bellows are produced in a mold. Starting forty years ago, construction and length of ERV expansion joints have become recognized standards worldwide.

Hose Assy Metalic

Hose assemblies are fabricated by welding the stem and butt of the hose ends together and welding the fittings onto the metal flex hose
Reasons to choose metal flex assemblies

    Need for the strength of a steel tube with the flexibly of a hose.
    Great heat resistance
    High pressure rating

Reasons to consider alternative solutions:

    Fabrication of metal flex hose assemblies involves welding the seam and butt as well as a fitting attachment. If not welded correctly, a leak path can be created.
    Metal flex assemblies are not readily available in most markets

A combination of the hard lines and flexible hoses can also be a great solution to unique challenges. It would be the most desirable combination if vibration is severe

Hydroulic / Rubber Hose

Rubber hose assemblies are fabricated by cutting the bulk hose to length and attaching the hose ends (sometimes called hose fittings) to either end by crimping, swaging or other methods (for field attachable and barb hose ends).

Reasons to use rubber hose assemblies:

• Generally easier to route a hose assembly over, under, around, or through a series of obstacles
• Generally easier to replace in the field
• Generally more widely available than either hard line or metal flex assembly
• Availability of wide range of hose types for wide range of applications
• Wide range of pressure ratings up to 10,000 psi
• Great resistance to vibration when used with proper fittings

Reasons to consider alternative solutions:

• Rubber hoses cannot withstand as much pressure and external forces as hard lines can.
• Rubber hoses are not as space efficient as hard lines.
• Rubber hose assemblies age and need to be periodically replaced.